An extremely sturdy TFT Desk Arm finished in a modern silver painted effect. This can either be screwed down to a desk or bolted through from the underside of the desk and the arm can then be adjusted to the optimum height using the pole clamp adjuster. The arm can be adjusted at both the rear and front swivel points and the plate can be tilted or rotated. A cable hook is in place to support the cables from the TFT screen to the vertical pole. Designed to fit most TFT screens as it complies with VESA standards for screens with mounting holes which are 75mm or 100mm apart (simply measure the distance between the mounting holes on your model and if they are 75mm or 100mm apart then this will fit). Supports up to 10kg in weight. Supplied with screen mounting screws to fit the majority of monitors and bolt for through desk mounting. If screwing this down you will need appropriate screws for your mounting surface. Max. Height to centre of screen mounting plate from rear of mounting plate edge 43cm. Max. Extension from rear of mounting plate to screen mounting plate 35.5cm. Min. Extension from rear of mounting plate when arm fully pushed back 15cm. Also available in Black as a clamp version.
No comments:
Post a Comment